Local Canning Vale Team

Servicing homes across Armadale. Fixed Properly, or You’ll Know Why Not.

Same Day Service, Subject to Availability
In-House Trained, Licensed Technicians
Fully Licensed, In-House Technicians
12 Month Parts and 3 Month Labour Warranty
Reviewed by: Siu, Senior Appliance Technician · Perth | Last updated: 13 July 2026
Cooktop Repairs Melbourne with Tech Jimmy
Meet Our Senior Appliance Technician

Appliance Repairs in Armadale

Armadale’s housing has been here a while, and it shows in the appliances we get called out to. People tend to stay put and keep things running rather than replace them at the first sign of trouble, so by the time we’re called, the fault is usually something that’s been building quietly rather than a sudden failure.

That quiet build-up is really the story of most Armadale jobs. A fridge doesn’t stop cooling overnight; it starts running a little warmer on one side for weeks before anyone thinks to call someone. A washing machine doesn’t just die mid-cycle; it’s been struggling through its spin cycle for a while first. Around streets like Blythe Place and Elanora Road, that’s the pattern we see again and again: something small going unnoticed until it’s harder to ignore.

Catching it early is really the whole game. Our licensed and in-house-trained technicians are used to tracing a fault back to whatever’s been quietly wearing down, rather than treating every callout as a mystery, and that’s usually what stops a small fault becoming a much bigger repair. Most of the time, we catch it before it gets that far.

Common early warning signs we see in Armadale include:

Fridge Temperature Issues

Fridge cooling unevenly, one side warm while the other stays cold

Fridge Not Cooling

Fridge not cooling at all or struggling to reach temperature

Washing machine Cycle Issue

Washing machine not spinning, not draining, or stuck partway through a cycle

Oven Heating Issue

Oven or rangehood controls not responding or heating elements not working

Fridge Leak Issues

Fridge leaking or showing signs of water pooling inside the unit

Don’t wait for a small fault to turn into a bigger repair. Contact our Retail Support Team today to arrange a same-day booking in Armadale.

Common Faults We See in Armadale

Why does a fridge cool unevenly, with one side colder than the other?

When airflow around the condenser is restricted, the fridge struggles to circulate cold air evenly through the cabinet, leaving one side noticeably warmer than the other.

We’ve seen this on a Westinghouse fridge near Blythe Place, where a plastic bag had wrapped itself around the condenser fan and years of dust and hair had settled in around it, stopping the fan from turning properly.

Why does water pool inside a fridge or leak from the top of the unit?

A blocked rear drain stops defrost water from draining away as it should, and once it backs up, it can pool inside the cabinet or leak from above rather than draining out the back the way it’s designed to.

We’ve seen this on a Fisher & Paykel fridge near Elanora Road, where the blockage was straightforward to clear, though the ice that had already formed inside meant the customer needed to leave the unit switched off for a few days to defrost properly.

Why does a front loader stop draining or pumping water out properly?

A worn or faulty water inlet valve can prevent a washing machine from drawing or expelling water properly during a cycle, and it’s a common point of failure on older machines that have been through years of regular use.

We saw this on an Electrolux washing machine near Brigalow Way, where fitting a new inlet valve had the machine pumping normally again.

Why does a top loader’s drum stop spinning?

Worn suspension components can stop a top loader’s drum from spinning properly, since the drum relies on that suspension to stay balanced and move freely during a cycle.

A Fisher & Paykel top loader near Nasura Grove came in with this fault, and a new suspension kit had the drum spinning evenly again.

Why do an oven and rangehood sometimes fail around the same time?

It’s not always related, but in older kitchens, an oven’s selector switch and a rangehood’s control assembly are both electrical components that wear over years of daily use, so it’s not unusual for one to fail not long after the other.

In one Armadale kitchen, an ARDA oven and a Technika rangehood both went within weeks of each other, and both were back working after the same visit.

Recent Armadale Jobs

Here are a few appliance repairs we’ve completed in Armadale recently.

Case Study 1: Fisher & Paykel Fridge, Not Cooling

Location: Home near Dale Road, Armadale

A Fisher & Paykel fridge had stopped cooling altogether. On the first visit, our technician diagnosed a failed defrost element as the cause and ordered the part in.

The customer was kept informed while we sourced it, and on the return visit the element was fitted and the fridge tested to confirm it was cooling properly again.

A straightforward fix once the right part was in hand, but one that needed the return trip to do properly rather than a quick workaround on the day.

Updated Date – July 2026

Case Study 2: Westinghouse Fridge, No Cooling at All

Location: Home near Rigden Street, Armadale

Both the fridge and freezer sections of a Westinghouse unit had stopped cooling completely. On inspection, our technician traced the fault to the main control board, which needed to be replaced rather than repaired.

The board was ordered in and fitted on the return visit, with the technician checking both compartments were holding temperature properly before finishing up. A bigger job than most fridge callouts, but still one part doing the damage rather than the unit needing replacement.

Updated Date – July 2026

Case Study 3: Asko Washing Machine, Customer-Supplied Parts Fitted

Location: Home near Robin Hood Avenue, Armadale

A customer had already sourced a replacement door handle, rubber seal, and screws for their Asko washing machine and wanted a technician to fit them properly and reassemble the door.

Rather than diagnosing a fault from scratch, our technician fitted the supplied parts, reassembled the door, and tested the machine through a full cycle to confirm everything was sealing and operating as it should. A good example of how we’re happy to finish a job on your terms, not just our own.

Updated Date – July 2026

How quickly can we get to Armadale?

Book Service
Dishwasher Maintenance Tips for Cleaner Dishes and Fewer Breakdowns

Appliance Types and Brands We Service in Armadale

We service both domestic and commercial appliances across Armadale and surrounding hills suburbs. A lot of what we work on here has been in service for years, so alongside the usual mainstream names, we regularly deal with older or less common brands and generic replacement parts that keep a well-used appliance running rather than replacing it outright.

Brand not listed? Call us, we likely service it.

Frequently Asked Questions by Armadale Customers

Is it still worth repairing an older appliance, or should I just replace it?

In most cases, yes. A lot of what we see in Armadale is a fridge, washing machine, or oven that’s been running for years, and more often than not, the fault comes down to one worn part rather than the whole unit failing. We recently replaced a main control board on a Westinghouse fridge that had completely stopped cooling, a bigger job than most, but still cheaper and faster than starting over with a new unit.

Do you carry parts for older or less common brands?

We carry the common high-turnover parts in our vans, but for older or less mainstream brands, we may need to source a specific part before completing the repair. We recently attended a job involving an ARDA oven and a Technika rangehood, both older brands, and had both working again in the same visit once we sourced the right parts.

I’ve already got the replacement parts for my appliance. Can you just fit them?

Yes. If you’ve sourced the parts yourself, whether it’s a door seal, a handle, or something else, we’re happy to fit them and test the appliance properly afterwards. We recently did exactly this for an Asko washing machine, fitting a customer-supplied handle and door seal and confirming everything sealed and ran correctly before finishing up.

How much does an appliance repair cost in Armadale?

Most appliance repairs in Armadale fall between $150 and $300 depending on the appliance and fault.

Common ranges: fridge condenser or drain blockage clearance $150-$200; fridge control board or defrost element replacement $200-$300; washing machine inlet valve or suspension kit replacement $180-$280; oven or rangehood switch and control repairs $150-$250.

For a more accurate estimate, visit our pricing page or call our Retail Support Team.

Do you offer same-day appliance repairs in Armadale?

Yes, same-day service is available in Armadale subject to technician availability, usually within a 2-3 hour window from booking. Many faults, like a blocked drain or a straightforward valve replacement, are resolved in a single visit. Where a part needs to be ordered in, as with a defrost element or control board, we return without charging an additional call-out fee.

My appliance seems to be cooling or working unevenly rather than completely broken. Is that still worth calling about?

Yes, and it’s often easier to fix while it’s still a partial fault rather than a complete failure. We attended a fridge that was cooling on one side but not the other, caused by something as simple as a plastic bag caught around the condenser fan. Left alone, that kind of restricted airflow puts more strain on the compressor over time, so it’s worth having checked sooner rather than later.

Perth Suburbs We Regularly Cover

Don’t see your suburbs?

If your suburb isn’t listed, feel free to get in touch with our dedicated support team, and we’ll confirm service availability. Same-day or next-day bookings may be available depending on your location.

Ready to fix your appliance?

Don’t risk a DIY job or expensive replacement. Most appliances can be fixed for a fraction of the cost of a new one.

CALL NOW

AVAILABLE

Mon–Fri: 8:30 AM – 7:00 PM

Sat: 8:30 AM – 4:30 PM

    CALL US: 1300 834 633

    or leave a message using the form below





    📷 Add a photo to get a faster quote

    A quick snap of the fault — or the model/rating label — helps us bring the right parts. (Optional)


    (08) 9551 7923