While installing a dishwasher seems challenging, uninstalling the dishwasher maybe even more so.
If you’re wondering how to uninstall a dishwasher, you’re not alone. This process can seem confusing and complicated, but it’s really not.
In this article, we’re here to walk you through the steps of uninstalling a dishwasher so that you can do it yourself without any trouble. So let’s get started!
7 Simple Steps on How to Remove A Dishwasher
Here are the seven simple steps on how to uninstall an old dishwasher:
Step #1: Turn off the power
Before you do anything, you’ll want to ensure that you turn off the electrical circuit of your dishwasher. This will allow you to work on the dishwasher without any risk of electrocution.
The power switch is usually located near the dishwasher, so look for a switch that says “power” or “off.” If you’re unsure where the power switch is, you can always shut off the power to the whole house.
Step #2: Disconnect the water supply tube/ rubber hose
The next step is to disconnect the water supply from the dishwasher. This will help prevent any water damage while working on the dishwasher.
To do this, locate the water line that runs to the fixture shutoff valve. If you don’t have a shut-off valve, you need to disconnect the hot water pipe that runs to the dishwasher.
Once you’ve located the water supply, turn the shut-off valve to the “off” position. If you don’t have a dedicated shutoff valve, use a wrench to disconnect the hot water pipe from the dishwasher.
Step #3: Drain the water
Once the power and water supply are off, you’ll need to drain all the water from the dishwasher. To do this, you’ll need to remove the hose from the dishwasher to the sink.
Once the hose is removed, put a bowl or bucket underneath the end of the hose to catch any water that comes out. Then, open up the Dishwasher door and prop it open with a dish towel.
This will allow the water to drain out of the dishwasher and into your bowl or bucket. You may need to wait a few minutes for all the water to drain.
For a step-by-step guide of this process, you can also check this blog: How To Drain A Dishwasher
Step #4: Disconnect the drain line
The next step is to disconnect the drain line from the dishwasher. This will allow you to remove the dishwasher without having to worry about the drain line getting in the way.
To do this, locate the drain line that runs from the dishwasher to the sink. Once you’ve found it, use a wrench to dismantle the sink drain tailpiece.
Once the tailpiece is removed, you should be able to pull the drain line out of the dishwasher. If the drain line is stuck, you can try wiggling it back and forth until it comes loose. The plastic tube covered in the dishwasher’s insulation can also be removed.
Step #5: Unscrew the metal mounting brackets
Once the power, water, and drain lines are disconnected, you can start to remove the dishwasher from the cabinets.
To do this, you’ll need to unscrew the mounting brackets holding the dishwasher in place. These mounting screws are usually located on the top or sides of the dishwasher. Once you’ve removed the screws, you can proceed to the next step.
Step #6: Lower the dishwasher
Now that the dishwasher is disconnected from the power, water, and drain, you can lower it from its current position.
Usually, dishwashers have legs that can be adjusted so that you can lower them down. If your dishwasher doesn’t have legs, you may need to remove the brackets that are holding it in place. You might also need channel lock pliers to help you remove the brackets.
Step #7: Remove the dishwasher
Once the dishwasher is lowered, you can remove it from its current location. You may need someone to help you carry it, as dishwashers can be quite heavy.
Unable To Remove Your Dishwasher? Call a professional
If you’re still having trouble removing the dishwasher, or if you don’t feel comfortable doing it yourself, you can always call a professional.
A professional will be able to remove the dishwasher quickly and efficiently without any trouble. They may even be able to give you some tips on how to properly install a new dishwasher.
We at Quality Appliance Repair are always happy to help our customers with their appliance needs. We provide appliance repair, installation, and maintenance all over Australia. Our networks of qualified appliance repair technicians can help you with your dishwasher problems.
To learn more or to schedule a consultation, repair, or installation, please don’t hesitate to reach out to us using the contact details provided below:
- Dishwasher Repairs Melbourne – (03) 9034 6162
- Dishwasher Repairs Perth – (08) 9551 7923
- Dishwasher Repairs Adelaide – (08) 6118 7045
- Dishwasher Repairs Sydney – (02) 6190 1313
- Dishwasher Repair Brisbane – (07) 3088 9002
Contact us today for more information!
Removing a dishwasher can be a difficult and time-consuming task. However, it’s important to ensure that you follow all of the steps carefully to avoid any damage to your home or appliance.
If you’re still having trouble removing the dishwasher or are uncomfortable doing it yourself, you can always call a professional. A professional can remove the dishwasher quickly and efficiently without any trouble.
Frequently Asked Questions
How do you drain a dishwasher before removing it?
To drain a dishwasher before removing it, you’ll need to remove the hose that goes from the dishwasher to the sink. Once the hose is removed, put a bowl or bucket underneath the end of the hose to catch any water that comes out.
Then, open up the dishwasher door and prop it open with a dish towel. This will allow the water to drain out of the dishwasher and into your bowl or bucket. You may need to wait a few minutes for all the water to drain.
How do you cap off the dishwasher pipe?
You can use a rubber stopper or plug if you need to cap off the dishwasher pipe. First, find the end of the pipe that goes into the wall. Then, take your rubber stopper or plug it into the pipe’s end. Make sure it’s inserted all the way so that no water can leak.
Using a piece of duct tape to secure the stopper or plug it in place is also a way to cap off the pipe. Wrap the duct tape around the stopper or plug as well as around the pipe. This will create a waterproof seal to prevent any water from leaking.