A lot of people believe that drainage is something the washing machine does automatically, but in reality, this appliance requires both a drain line and a pump to drain properly.

But what exact steps do you need to take to drain your washing machine? Keep on reading to find out.

Here are some of the following:

1. First Power It Down And Then Turn Off A Water Supply


power down the washing machine before draining


  • Power down the machine to avoid any electronic problems. If you detect a problem, power off a machine to prevent any further complications. To do this, switch a power button on a model off and then unplug the washer from an outlet.
  • Turn water supply hoses off. A water supply will be blue and red hoses or knobs that are running from the machine to the pipe on a wall. Twist them counterclockwise until they won’t move further to shut off water to a machine.


2. Drain A Drain Hose


Oftentimes, the clog in a hose prevents the washing machine from draining. When that’s the case, you need to try disconnecting it and taking a look inside. In order to do this, wiggle a hose and then slide it right out.

Now try holding the hose upright in the air and once you have the bucket ready, lower a drain line and then place it in a bucket. In case water moves slowly or drips out, you probably have the drain clog.

Luckily, drain lines are quite short so removing the clog is easy. Simply break up a blockage with the unclogging solution or plumber’s snake.


3. Check Out A Drain Pump

checking out the drain pump of washing machine


  • The washing machine uses the pump for removing water from a machine, which may also get clogged. When that happens, you should open up a washer to access a pump. Models vary, so don’t forget to check the user manual to find out where a pump is located. Usually, drain pumps are translucent, meaning you may see a clog even from the outside.
  • Following your user manual, try disconnecting a drain pump for accessing a clog. Have the bucket handy because water may come out once you do this. You should use the pliers to pull a clog away. In certain cases, a pump itself can be bad. This typically results in strange noises as well as leaks, and you’ll need to replace it to drain a machine.


4. If Needed, Drain Interior Manually

If you’ve already checked each component of a drain line but still can’t get a machine to drain, try draining it manually.

This isn’t the actual fix, but once you do this, water won’t sit around inside the machine, letting you access clothes.

In case you’d like to drain water from the front-loader washing machine, try a drain hose process that is outlined above in step 2. Avoid opening a door to prevent water from gushing out all over the floor.

For the top-loading machine, it’s very simple. To drain water from the washer manually, use the siphon or bucket for getting out most of that water.

Once it’s too low and you can’t scoop up any more of it, try using the towels to soak up any remaining water.

5. Know When It’s Time To Call The Professional

A repairman preparing his tools

Many homeowners can handle a basic drainage problem, however, certain repairs may be difficult if a person doesn’t have the expertise.

There are some potential issues, including a snapped belt or broken drain pump, that may keep the washing machine from draining.

If that’s the case and you stumble upon a complicated issue you can’t handle, consider calling the expert plumber to assist you.

Quick Tips For Washing Machine Drainage Options


There are a few helpful washing machine drainage options you may want to consider.

If you plan to use the exact same washing machine for a prolonged period of time, it’s preferable to go with an underground pipe connection option.

However, in case you are low on budget but still want something that can be useful, the best option is to install a laundry tub and standpipe.

Bottom Line

As you can see, draining your washing machine doesn’t have to be a complicated process.

All you need to do is follow the steps and tips mentioned above to do so.

However, if you won’t be able to solve the issue all by yourself, make sure to contact the professional so that they can effectively deal with the problem once and for all.


Our Washing Machine Repair Services In Australia

Washing Machine Repair Perth

Washing Machine Repair Melbourne

Washing Machine Repair Sydney

Washing Machine Repair Adelaide

Washing Machine Repair Canberra

Washing Machine Repair Brisbane

Washing Machine Repair Hobart

Same Day Repair* and 12 Month Parts Warranty -All Brands, Affordable Prices

Call a Local Appliance Tech Now

Google Rating
Based on 1381 reviews